New Products

Forney 95FI-A (Cat. No. 301)

• Ready to weld right out of the box!
• Infinitely variable heat settings.
• Welds 1/16" - 5/64" electrodes.
• Simple to operate and portable, weighs just 29 lbs.
• Convenient 120V input power.
• Automatic thermal overload protection.

Includes face shield, combination chipping hammer & brush, electrode holder, ground clamp and starter pack of electrodes. Tough, scratch resistant cabinet.

Main Voltage: 120V
Max. OCV: 36V
Duty Cycle: 20% @ 60 Amps
Output Range: 30 Amps - 90 Amps
Wire Diameter: 1/16" - 5/64"
Weight: 29 lbs
Welds up to 3/16" material

Forney 95FI (Cat. No. 304)

• Ready to weld right out of the box!
• Welds all types of carbon steel.
• Simple to operate and portable, weighs just 43 pounds.
• Two power settings for accurate welding control.
• Convenient 120V input power.
• Automatic thermal overload protection.
• Electronic wire speed control.
• Tweco® compatible welding torch.

Includes face shield, combination chipping hammer & brush, welding torch, ground clamp, and starter roll of flux cored welding wire. Tough, scratch resistant cabinet.

Main Voltage: 120V
Max. OCV: 27V DC
Duty Cycle: 20% @ 60 Amps
Output Range: 20 Amps - 95 Amps
Wire Diameter: .030, .035"
Weight: 43 lbs
Welds up to 3/16" material

Forney 130FI (Cat. No. 306)

• Simple to operate. Ready to weld right out of the box!
• Welds mild steel, aluminum, stainless steel and cast iron (requires correct wire and gas).
• Multiple voltage settings for accurate heat control.
• Convenient 120V input power.
• Tweco® compatible welding torch.
• Automatic thermal overload protection.
• Portable, weighs just 53 pounds.
• Fan cooled for higher performance.
• Easily converted for MIG (GMAW) welding.

Includes face shield, combination chipping hammer & brush, welding torch, ground clamp, and starter roll of flux cored welding wire. Tough, scratch resistant cabinet.

Main Voltage: 120V
Max. OCV: 30V
Duty Cycle: 40% @ 60 Amps
Output Range: 40 Amps - 130 Amps
Wire Diameter: .023, .030, .035"
Internal Cooling Fan: Yes
Weight: 53 lbs
Welds up to 1/4" in a single pass

Forney 180FI (Cat. No. 308)

• Simple to operate. Ready to weld right out of the box!
• Welds mild steel, aluminum, stainless steel and cast iron (requires correct wire and gas).
• Multiple voltage settings for accurate heat control.
• Powerful 230V input power.
• Tweco® compatible welding torch.
• Automatic thermal overload protection.
• Fan cooled for higher performance.
• Easily converted for MIG (GMAW) welding.

Includes face shield, combination chipping hammer & brush, welding torch, ground clamp, and starter roll of flux cored welding wire. Tough, scratch resistant cabinet.

Main Voltage: 230V
Max. OCV: 30V
Duty Cycle: 25% @ 120 Amps
Output Range: 35 Amps - 180 Amps
Wire Diameter: .023, .030, .035"
Internal Cooling Fan: Yes
Weight: 59 lbs
Welds up to 3/8" in a single pass

AT-100 (Cat. No. 390)

• 100 Amp DC output power.
• Welds most DC mild steel, stainless steel and cast iron.
• Inverter technology provides a compact and light-weight welder at just 6.2 lbs!
• Featuring a unique "Hot Start" capability which provides a steady, non-stick control that resists electrical fluctuations.
• TIG torch and accessories sold separately.

Includes electrode holder, ground clamp with lead, and combination chipping hammer & brush. Shoulder strap provided.

Main Voltage: 120V
Max. OCV: 70V
Duty Cycle: 35% @ 85 Amps
Output Range: 10 Amps - 100 Amps
Wire Diameter: 1/16" - 3/32"
Internal Fan: Yes
Weight: 29 lbs
Welds up to 1/16" to 3/32" mild steel welding rod

AT-160 (Cat. No. 393)

• 160 Amp DC Power Source.
• Welds most DC mild steel, stainless steel and cast iron.
• Inverter technology provides a compact and light-weight welder at just 8.5lbs!
• Featuring a unique "Hot-Start" capability which provides a steady, non-stick control that resists electrical fluctuations.
• TIG torch and accessories sold separately.

Includes electrode holder, ground clamp with lead, and combination chipping hammer & brush. Shoulder strap provided.

Main Voltage: 230V
Max. OCV: 65V
Duty Cycle: 35% @ 150 Amps
Output Range: 5 Amps - 155 Amps
Electrode Diameter: 1/8" to 5/32"
Internal Cooling Fan: Yes
Weight: 8.5 lbs
Welds up to 1/8" to 5/32" mild steel welding rod

F250-P (Cat. No. 394)

• 120 Volt Plasma Cutting System with Heavy-Duty, Built-In Air Compressor.
• Convenient 120V input power.
• Make precision cuts in thin metals, easily cuts 1/8", and severs to 1/4".
• Cuts mild steel, aluminum, stainless steel, brass and more.
• Inverter technology makes an easily portable cutting system at just 19lbs!
• Built-in handle.

Includes 15-foot Torch and Ground Clamp.

Main Voltage: 120V
Minimum Input Power: 15-Amp Single Phase (20-Amp Recommended)
Duty Cycle: 35% @ 20 Amps, 60% @ 10 Amps, 100% @ 7 Amps
Output Range: 5-20 Amps, continuously variable
Gas: Built-in Air Compressor
Gas Specifications: Clean, dry, oil free
Operating Gas Pressure: 43 PSI / 3 bar
Gas Flow Requirements: 74 scfh /35 lpm
Rated cut is 1/8" and severs to 1/4"